ISO 色漆和清漆 标准目录-至2007年，欢迎补充

zblhx84

欢迎补充，包括目录和标准全文。

欢迎邮索（蓝色部分暂没有）

一、1字头的

ISO 1513:1992 Paints and varnishes -- Examination and preparation of samples for testing
ISO 1513:1992/Cor 1:1994

ISO 1514:2004 Paints and varnishes -- Standard panels for testing

ISO 1516:2002 Determination of flash/no flash -- Closed cup equilibrium method

ISO 1517:1973 Paints and varnishes -- Surface-drying test -- Ballotini method

ISO 1518:1992 Paints and varnishes -- Scratch test

ISO 1519:2002 Paints and varnishes -- Bend test (cylindrical mandrel)

ISO 1520:2006 Paints and varnishes -- Cupping test

ISO 1522:1998 Paints and varnishes -- Pendulum damping test
ISO 1522:1998/Cor 1:1998

ISO 1523:2002 Determination of flash point -- Closed cup equilibrium method

ISO 1524:2000 Paints, varnishes and printing inks -- Determination of fineness of grind

ISO 11341:2004 Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation

ISO 11503:1995 Paints and varnishes -- Determination of resistance to humidity (intermittent condensation)

ISO 11507:2007 Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV and water

ISO 11890-1:2000 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method

ISO 11890-2:2006 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gas-chromatographic method

ISO 11909:2007 Binders for paints and varnishes —Polyisocyanate resins — General methods of test

ISO 11997-1:2005 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity

ISO 11997-2:2000 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light

ISO 11998:2006 Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings

ISO 12137-1:1997 Paints and varnishes -- Determination of mar resistance -- Part 1: Method using a curved stylus
ISO 12137-1:1997/Cor 1:1998

ISO 12137-2:1997 Paints and varnishes -- Determination of mar resistance -- Part 2: Method using a pointed stylus

ISO 12944-1：1998 Paints and varnishes —Corrosion protection of steel structures by protective paint systems -Part 1：General introduction

ISO 12944-2:1998 paints and varnishes —Corrosion protection of steel structures by protective paint systems -Part 2：Classification of environments

ISO 12944-3:1998 paints and varnishes —Corrosion protection of steel structures by protective paint systems -Part 3：Design considerations

ISO 12944-4:1998 paints and varnishes —Corrosion protection of steel structures by protective paint systems -Part 4: Type of surface and surface preparation

ISO 12944-5:2007 paints and varnishes —Corrosion protection of steel structures by protective paint systems -Part 5: Protective paint systems

ISO 12944-6:1998 paints and varnishes —Corrosion protection of steel structures by protective paint systems -Part 6: Laboratory performance test methods

ISO 12944-7:1998 paints and varnishes —Corrosion protection of steel structures by protective paint systems -Part 7: Execution and supervision of paint work

ISO 12944-8:1998 paints and varnishes —Corrosion protection of steel structures by protective paint systems –Part 8: Development of specification for new work and maintenance

ISO 13803:2000 Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees

ISO 15181-1:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides

ISO 15181-2:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate

ISO 15181-3：2007
Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract-First Edition

ISO 15184:1998 Paints and varnishes -- Determination of film hardness by pencil test

ISO 15234:1999 Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -- Determination of the steady-state concentration of formaldehyde in a small test chamber

ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes -- Sampling

ISO 15710:2002 Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

ISO 15711:2003 Paints and varnishes -- Determination of resistance to cathodic disbonding of coatings exposed to sea water

ISO 16053:2004 Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test

ISO 16276-1:2007 Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating —Part 1: Pull-off testing

ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating —Part 2:Cross-cut testing and X-cut testing

ISO 16805:2003 Binders for paints and varnishes -- Determination of glass transition temperature

ISO 16862:2003 Paints and varnishes -- Evaluation of sag resistance

ISO 17872:2007 Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

ISO 17895:2005 Paints and varnishes -- Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)

ISO 19334:2006 Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis

ISO 19840：2004 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces

zblhx84

二、2字头的：
ISO 2409:2007 Paints and varnishes -- Cross-cut test

ISO 2431:1993 Paints and varnishes -- Determination of flow time by use of flow cups
ISO 2431:1993/Cor 1:1994
ISO 2431:1993/Cor 2:1999

ISO 2808:2007 Paints and varnishes -- Determination of film thickness

ISO 2810:2004 Paints and varnishes -- Natural weathering of coatings -- Exposure and assessment

ISO 2811-1:1997 Paints and varnishes -- Determination of density -- Part 1: Pyknometer method

ISO 2811-2:1997 Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method

ISO 2811-3:1997 Paints and varnishes -- Determination of density -- Part 3: Oscillation method

ISO 2811-4:1997 Paints and varnishes -- Determination of density -- Part 4: Pressure cup method

ISO 2812-1:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 1: Immersion in liquids other than water

ISO 2812-2:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method

ISO 2812-3:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 1: Method using an absorbent medium

ISO 2812-4:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Spotting methods

ISO 2812-5:207 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Temperature-gradient oven method

ISO 2813:1994 Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
ISO 2813:1994/Cor 1:1997

ISO 2814:1973 Paints and varnishes -- Comparison of contrast ratio (hiding power) of paints of the same type and colour

ISO 2815:2003 Paints and varnishes -- Buchholz indentation test

ISO 2884-1:1999 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear

ISO 2884-2:2003 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed

ISO 20340：2003 Paints and varnishes — Performance requirements for protective paint systems for offshore and related structures

ISO 20566:2005 Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory car-wash

ISO 20567-1:2005 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 1: Multi-impact testing

ISO 20567-2:2005 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 2: Single-impact test with a guided impact body

ISO 21227-1:2003 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 1: General guidance

ISO 21227-2:2006 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 2: Evaluation procedure for multi-impact stone-chipping test

ISO/TR 24430:2003 Paints and varnishes -- Guidelines for the determination of the precision of a test method by interlaboratory trials

zblhx84

三、3字头的：
ISO 3231:1993 Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide

ISO 3233:1998 Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
ISO 3233:1998/Cor 1:1999

ISO 3248:1998 Paints and varnishes -- Determination of the effect of heat

ISO 3251:2003 Paints, varnishes and plastics -- Determination of non-volatile-matter content

ISO 3270:1984 Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing

ISO 3668:1998 Paints and varnishes -- Visual comparison of the colour of paints

ISO 3678:1976 Paints and varnishes -- Print-free test

ISO 3679:2004 Determination of flash point -- Rapid equilibrium closed cup method

ISO 3680:2004 Determination of flash/no flash -- Rapid equilibrium closed cup method

ISO 3856-1:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 1: Determination of lead content -- Flame atomic absorption spectrometric method and dithizone spectrophotometric method

ISO 3856-2:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 2: Determination of antimony content -- Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method

ISO 3856-3:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method

ISO 3856-4:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 4: Determination of cadmium content -- Flame atomic absorption spectrometric method and polarographic method

ISO 3856-5:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -- Diphenylcarbazide spectrophotometric method  

ISO 3856-6:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 6: Determination of total chromium content of the liquid portion of the paint -- Flame atomic absorption spectrometric method

ISO 3856-7:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints -- Flameless atomic absorption spectrometric method

zblhx84

四、4字头的
ISO 4618:2006 Paints and varnishes -- Terms and definitions

ISO 4622:1992 Paints and varnishes -- Pressure test for stackability

ISO 4623-1:2000 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates

ISO 4623-2:2003 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 2: Aluminium substrates
ISO 4623-2:2003/Cor 1:2005

ISO 4624:2002 Paints and varnishes -- Pull-off test for adhesion

ISO 4628-1:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system

ISO 4628-2:2004 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering

ISO 4628-3:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting

ISO 4628-4:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking

ISO 4628-5:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking

ISO 4628-6:2007 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 6: Rating of degree of chalking by tape method

ISO 4628-7:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 7: Assessment of degree of chalking by velvet method

ISO 4628-8:2005 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 8: Assessment of degree of delamination and corrosion around a scribe

ISO 4628-10:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion

zblhx84

五、6字头的：

ISO 6270-1:1998 Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation

ISO 6270-2:2005 Paints and varnishes -- Determination of resistance to humidity -- Part 2: Procedure for exposing test specimens in condensation-water atmospheres

ISO 6272-1:2002 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter

ISO 6272-2:2002 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter

ISO 6503:1984 Paints and varnishes -- Determination of total lead -- Flame atomic absorption spectrometric method

ISO 6504-1:1983 Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk method for white and light-coloured paints

ISO 6504-3:2006 Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

ISO 6713:1984 Paints and varnishes -- Preparation of acid extracts from paints in liquid or powder form

ISO 6860:2006 Paints and varnishes -- Bend test (conical mandrel)

zblhx84

六、7字头的

ISO 7252:1984 Paints and varnishes -- Determination of total mercury -- Flameless atomic absorption spectrometric method

ISO 7724-1:1984 Paints and varnishes -- Colorimetry -- Part 1: Principles

ISO 7724-2:1984 Paints and varnishes -- Colorimetry -- Part 2: Colour measurement

ISO 7724-3:1984 Paints and varnishes -- Colorimetry -- Part 3: Calculation of colour differences

ISO 7783-1:1996 Paints and varnishes -- Determination of water-vapour transmission rate -- Part 1: Dish method for free films
ISO 7783-1:1996/Cor 1:1998

ISO 7783-2:1999 Paints and varnishes -- Coating materials and coating systems for exterior masonry and concrete -- Part 2: Determination and classification of water-vapour transmission rate (permeability)

ISO 7784-1:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Rotating abrasive-paper-covered wheel method

ISO 7784-2:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method

ISO 7784-3:2000 Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method

zblhx84

七、8字头的：
ISO 8130-1:1992 Coating powders -- Part 1: Determination of particle size distribution by sieving

ISO 8130-2:1992 Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method)

ISO 8130-3:1992 Coating powders -- Part 3: Determination of density by liquid displacement pyknometer

ISO 8130-4:1992 Coating powders -- Part 4: Calculation of lower explosion limit
ISO 8130-4:1992/Cor 1:1993

ISO 8130-5:1992 Coating powders -- Part 5: Determination of flow properties of a powder/air mixture

ISO 8130-6:1992 Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature
ISO 8130-6:1992/Amd 1:1998

ISO 8130-7:1992 Coating powders -- Part 7: Determination of loss of mass on stoving

ISO 8130-8:1994 Coating powders -- Part 8: Assessment of the storage stability of thermosetting powders

ISO 8130-9:1992 Coating powders -- Part 9: Sampling

ISO 8130-10:1998 Coating powders -- Part 10: Determination of deposition efficiency

ISO 8130-11:1997 Coating powders -- Part 11: Inclined-plane flow test

ISO 8130-12:1998 Coating powders -- Part 12: Determination of compatibility

ISO 8130-13:2001 Coating powders -- Part 13: Particle size analysis by laser diffraction

ISO 8130-14:2004 Coating powders -- Part 14: Terminology

zblhx84

八、9字头的：

ISO 9038:2002 Test for sustained combustibility of liquids

ISO 9117:1990 Paints and varnishes -- Determination of through-dry state and through-dry time -- Method of test

ISO 9514:2005 Paints and varnishes -- Determination of the pot life of multicomponent coating systems -- Preparation and conditioning of samples and guidelines for testing

zblhx84

全套目录下载

建议设ISO 涂料相关标准版、ASTM/SSPC/NACE 涂料相关标准版和其它涂料相关标准版