联众涂料论坛

标题: 防涂鸦涂料技术 [打印本页]

作者: zhou_jicang 时间: 2009-9-5 12:09
标题: 防涂鸦涂料技术
想和各位大虾探讨一下防涂鸦涂料
1-国内那几家在作, 做的如何?
2-市场前景如何
3-主要技术
4-有一家叫21 century coatings的公司，不知大虾们是否了解这家公司的产品，如果用过，感觉如何

作者: 庚申周生 时间: 2009-9-8 14:07
需要防涂鸦助剂吗？　化学成分为含羟基聚二甲基硅氧烷（羟基含量1.3％）

作者: cnlyk 时间: 2009-9-8 14:59
德固赛有防涂鸦树脂，效果还可以

作者: 涛声 时间: 2009-9-9 09:47
Tego有个助剂加了还是挺有用的，就是在哑光里用起来效果不行，表面会发花。
请问各位有什么好的助剂或树脂推荐？用在哑光、亮光漆里的。

作者: lnlcs 时间: 2009-9-9 10:13
直接找BYK的经销商，他们那里有这样的助剂，不过添加量很高，成本贵，这种油漆修补很困难，做不好层间没有一点附着力，水刷在立面的玻璃上一样，有一定技术含量。

作者: Nirvana 时间: 2009-9-9 22:12
看来很多是通过助剂技术来实现

作者: 小谭 时间: 2009-9-10 07:37
表面效果是用黑色大头笔画上去用布一擦就能去除。
直接用德固赛的一只树脂加氨基做成烤漆就可以了。
上海元邦也有一只可以，且价格比德固赛的便宜，遗憾的是树脂色数太深，不适合做白色。

作者: zxp 时间: 2009-9-10 07:44
国家正在制定相关防涂鸦涂料的标准，不知道在水性这一块前景如何

作者: w308688268 时间: 2009-10-8 14:59
FPU® “Anti-Graffi ti” Fluorinated Polyurethane 51PC101™
PRODUCT DESCRIPTION
51PC101TM is a high-performance, highly fl uorinated polyurethane top coat formulated for thin fi lm
applications, offering general ease of handling and application. It is a two-component, solvent
based, high solids enamel system which exhibits outstanding performance properties, compared to
higher build, multi-coat premium systems.
The patented “fl uoroshield” protection of 51PC101TM makes it virtually impervious to moisture and
oxygen permeation. 51PC101TM exhibits unsurpassed performance for all physical properties as
well as resistance to chemicals, weathering and uv degradation. 51PC101TM contains a special
“anti-graffi ti” feature making it resistant to graffi ti attack.
CHARACTERISTICS
A high performance, inert topcoat system designed to overcoat virtually any surface and make it resistant to corrosion, UV
breakdown, abrasion, graffi ti and chemical attack. FPU® coatings exhibit outstanding weathering characteristics. Developed
over two decades of research and development, FPU® has a proven service history.
51PC101TM is ideal for limited immersion service on marine, aerospace, architectural, industrial and automotive equipment,
ferrous and non-ferrous metals, masonry, timber, fi berglass and carbon fi ber. It provides a high quality fi nish, and offers
exceptional all round performance with an expected life span exceeding 20 years.
􀀻 Outstanding Hydrophobic and Oleophobic surface properties
􀀻 Impervious to moisture and oxygen permeation (Osmotic barrier)
􀀻 Highly fl exible and outstanding impact and abrasion resistance
􀀻 Low surface energy which resists soiling and marking
􀀻 Highly resistant to attack by hydrocarbons and chemical products
􀀻 Completely insensitive to UV radiation
􀀻 Highly resistant to graffi ti attack from spray paint and marker
Application
For optimum appearance properties, 51PC101™ should be spray applied in two to three coats to a minimum of 2 mils DFT / 50
microns DFT. Always allow each coat to “fl ash off” to a tacked state prior to a following coat.
51PC101™ may also be spray applied, brushed or rolled in one coat, unreduced to the recommended DFT.
FPU® coatings must not be applied to surfaces at ambient temperatures above 350C / 950F. For optimum application
properties, the temperature of the material should be between 100C and 250C / 500F and 800F prior to mixing and application.
Apply the coating only when the surface temperature is more than 50F or 30C above the dew point temperature of the
surrounding air and relative humidity is below 85%, in order to prevent moisture condensation on the surface.
Mixing & Activation
Mixing ratio 2:1 by volume (2 parts base to 1 part activator)
Activator: 51AC100
Reduction: 00TR102 - Slow reducer
00TR100 - Fast reducer
Spray Viscosity: 21-25 seconds #2 Zahn
51PC101 is a two component coating system supplied in two separate containers. Part A is the base and Part B is the
activator. Prior to activation, Base component (Part A) must be thoroughly mixed by mechanical agitation. Following agitation,
with a paint stick, ensure all settled material is removed from the can bottom. After activation of Component A and Component
B together, agitate for approximately 1-2 minutes. Reduce activated 51PC101 to a maximum of 15% if required with
recommended reducer and use immediately. 51PC101 requires no induction period.
21st Century Coatings (Canada) Ltd. 1806-1111 West Georgia Street, Vancouver, BC, Canada V6E 4M3
Phone: (604) 204-0075 * Fax (604) 204-0003 * Email: info@21st-century-coatings-canada.com
Colors & Finishes
White, Clear and a full range of colors are available including metallic and pearlescent fi nishes.
High Gloss - > 90 / 600
Semi-Gloss - 50-60 / 600
Low Sheen - 30-40 / 600
Surface Preparation
Suitable substrates for 51PC101TM include ferrous metal, galvanized metal, aluminum, fi berglass, carbon fi ber, concrete and
wood. Good surface preparation and cleaning of all substrates to be coated is essential for optimum performance of the
coating system. All surfaces to be coated should be clean, dry and free from contaminants. For old or previously fi nished
sur fac es, the degree of preparation and cleaning required, is dependent upon the condition of the substrate.
Consult your 21st Century Coatings (Canada) Ltd. representative for recommended surface preparation procedures for your
specifi c project.
Storage & Handling
Hazardous Goods: Paint, Flammable Liquid, UN1263 Class III Hazchem 3YE
Shipping Information: 8.30 kg/18.25 lbs. per gallon unit including container - White
6.76 kg/14.9 lbs. per gallon unit including container - Clear
VOC content: 335 grams per liter / 2.8 lbs. per gallon - White
419 grams per liter / 3.5 lbs. per gallon - Clear
Flash Point (Seta Flash): 340C / 930F
Storage - FPU® coatings must be stored and handled in complience with all current local regulations applying to fl am ma ble, or
highly fl ammable liquids. Store in cool, dry, protected storage, well ventilated, between 50C-350C / 400F-950F and out of direct
sunlight, moisture or rain. Maintain unmixed material in sealed containers at all times.
Shelf Life - FPU® has a minimum shelf life of 12 months from the date of manufacture if stored as indicated above, unopened
in sealed containers. Ensure both components are consistent in appearance and thickness after stirring, and ensure that the
activator (Part B) is clear and transparent before mixing the components together.
Do not use activator that is not visually clear.
Curing
Dry tme @ 210C / 700Fambient air cure
Tack free: 4-6 Hours
Hard Cure: 24 hours
Full Cure: 3-5 days
Elevated Curing 400C - 600C / 1050F - 1400F for 40 minutes
FPU® “Anti-Graffi ti” Fluorinated Polyurethane 51PC101™
Pot Life
3 Hours @ 210C / 700F
1 1/2 Hours @ 320C / 900F However, these times may vary with environmental or climatic conditions
This material and its components are moisture sensitive. The product should be kept covered at all times after mixing and
during application to prevent contamination and prevent moisture absorption.
Coverage
51PC101TM exhibits excellent opacity and coverage when spray applied. If applying colors by means other than spray,
test opacity over a small section to ensure adequate coverage prior to general application.
Solids content (+/- 2%) 60% by volume - White
50% by volume - Clear
Number of Coats 2-3 coats at 50 microns / 2 mils DFT - White
2-3 coats only at 37.5 microns / 1 1/2 mils DFT - Clear
Coverage (theoretical) 19.66 m2 per litre @ 25 microns / 1 mil DFT - White
963 ft2 per gallon @ 25 microns / 1 mil DFT - White
16.39 m2 per litre @ 25 micron / 1 mil DFT - Clear
803 ft2 per gallon @ 25 microns / 1 mil DFT - Clear

作者: hudo123 时间: 2009-10-8 20:10
加氨基做成烤漆就可以吗

作者: cdz19840125 时间: 2009-10-8 21:11
这个啊，好像用双组分做效果不错。

作者: lnlcs 时间: 2009-10-9 11:51
10# hudo123
有的施工条件不允许怎么办？
要常温干燥的。

作者: zhyljq2002 时间: 2009-10-9 14:19
感觉这块的市场还是不错的，关键是要把成本降下来。

作者: 叶工 时间: 2009-10-9 16:02
用水性记号笔做的防涂鸦测试难度不大，大的是用溶剂性记号笔做防涂鸦测试的难度就大了，特别是做哑光清漆。现在水性漆只能做到用水性记号笔测试的，但用溶剂性记号笔测试的目前为止本人还没听过和见过。

作者: kevinfc 时间: 2010-3-30 14:39
用SILOK的3390可以做到，但流平性和透明性会受影响。

作者: anny725 时间: 2011-4-18 10:18
不知有稳定的这块树脂和助剂没有，做双组份产品！有与我联系！

作者: fding3188 时间: 2012-8-1 11:20

庚申周生发表于 2009-9-8 14:07
需要防涂鸦助剂吗？　化学成分为含羟基聚二甲基硅氧烷（羟基含量1.3％）

请问如何联系？

作者: kevinqian 时间: 2012-8-2 09:10
用水性丙烯酸也可以尝试下

作者: fding3188 时间: 2012-8-6 10:22

zhangbo2527 发表于 2011-4-18 11:21
用于防涂鸦的拜耳树脂和固化剂体系（水性聚氨酯），如有需要请提供联系方式！

能发一份产品资料吗？dingfan166@163.com，谢了！！

作者: fding3188 时间: 2012-8-6 10:23

庚申周生发表于 2009-9-8 14:07
需要防涂鸦助剂吗？　化学成分为含羟基聚二甲基硅氧烷（羟基含量1.3％）

怎么联系你？

作者: fding3188 时间: 2012-8-6 10:24

kevinqian 发表于 2012-8-2 09:10
用水性丙烯酸也可以尝试下

里边是不是需要加入防粘贴放涂鸦助剂

作者: guyanghua 时间: 2012-8-6 10:37
法国Mader生产防涂鸦涂料产品已经通过SNCF认证，目前也在国内国产化，有需要可以联系！

作者: yahoo 时间: 2012-8-6 11:25
这种涂料挺有意思的啊真的能防涂鸦么。。。

作者: fding3188 时间: 2012-8-27 11:35

zhangbo2527 发表于 2011-4-18 11:21
用于防涂鸦的拜耳树脂和固化剂体系（水性聚氨酯），如有需要请提供联系方式！

什么树脂，能否发一份产品资料？邮箱dingfan166@163.com。能提供样品吗?

作者: 路飞 时间: 2012-8-28 11:02
关键是看应用在什么产品上，，之前我见过英国人做的一种内外墙涂料。可以做到这样的效果，油性笔化上去以后能轻易的擦掉，，多是用于市政工程和高端别墅。。。售价好像是80块一公斤，，

作者: win1b 时间: 2012-9-3 21:39
"哈尔滨市1200个楼道单元门刷抗涂鸦涂料防乱贴乱画", 哪位大侠知道这工程用了谁家的涂料？

作者: shuhailong 时间: 2012-9-24 16:49

涛声发表于 2009-9-9 09:47
Tego有个助剂加了还是挺有用的，就是在哑光里用起来效果不行，表面会发花。
请问各位有什么好的助剂或树脂 ...

我给你推荐一款佳合助剂，韩国进口的，防发花

作者: mirrorzhao 时间: 2013-4-12 09:32

fding3188 发表于 2012-8-6 10:23
怎么联系你？

防涂鸦助剂请联系15868467528 能否留个号码联系你？

作者: yangsh1989 时间: 2014-11-14 22:55

mirrorzhao 发表于 2013-4-12 09:32
防涂鸦助剂请联系15868467528 能否留个号码联系你？

能否寄个样品试试？

作者: zzzazure 时间: 2014-11-15 14:18

yangsh1989 发表于 2014-11-14 22:55
能否寄个样品试试？

做什么样的产品呢？防涂鸦树脂目前国内做的已经很多了，加qq 1392690259，要样品或者交流都可以！

作者: yangsh1989 时间: 2014-11-15 22:59

guyanghua 发表于 2012-8-6 10:37
法国Mader生产防涂鸦涂料产品已经通过SNCF认证，目前也在国内国产化，有需要可以联系！

能否发一个样品给我！q920028827

作者: 西瓜 时间: 2014-11-19 08:42
试下这些助剂，BYK- SILCLEAN3700和3720，Tego-5000，AFCONA3250和3085（反应交联型）

作者: nbatiger 时间: 2015-5-13 10:07

shuhailong 发表于 2012-9-24 16:49
我给你推荐一款佳合助剂，韩国进口的，防发花

给我个样品

作者: chenzuyi 时间: 2015-7-27 08:29
试过德固赛的，还可以。。

作者: zhenxq 时间: 2017-7-26 15:41
易清洁效果表面助剂，防涂鸦产品，荷叶效应!
适用体系:溶剂型/UV,
特性:具有优异的耐记号笔擦拭，抗粘连性各疏水，疏油性，防指纹。适用清漆体系，
请联系:QQ：390458067

作者: minxin 时间: 2018-10-19 12:55

guyanghua 发表于 2012-8-6 10:37法国Mader生产防涂鸦涂料产品已经通过SNCF认证，目前也在国内国产化，有需要可以联系！

怎么联系你，我是新疆澳唯克涂料制造有限公司。18999964770

作者: heqiyang1234 时间: 2018-11-26 10:46

涛声发表于 2009-9-9 09:47Tego有个助剂加了还是挺有用的，就是在哑光里用起来效果不行，表面会发花。请问各位有什么好的助剂或树脂 ...

我们有个M-4900A，抗涂鸦效果一流，添加5%在与溶剂型涂料体系，油性大头笔几乎很难写上去。即使有一点点断断续续线性的附着，纸巾干擦可去除。且油笔写上去后可隔天也易去除。且对树脂有增硬功能。

欢迎光临联众涂料论坛 (http://bbs.coatu.com/)