油漆一般检测什么项目

njg168518

油漆在进场复试时需检测什么参数？最常用的？

ycg

看你是什么油漆了，用在什么地方呀，用途是什么才能决定要检测什么指标的

就这样生活

按照标准或客户的要求 。
不同类型的涂料检测的项目不一样

njg168518

各色醇酸磁漆、丙烯酸清漆、各色醇酸调合漆，建筑上用的，主要是防锈的！

就这样生活

这个有国家标准和行业标准
你找到之后，按标准检测就可以啦

lewisfei

供参考。。。
Overbake Stability
A hybrid powder will withstand twice the recommended cure time without discoloration.
Adhesion (ASTM D-3359, Method B)
Using pressure sensitive tape, no coating is lifted or removed between 1/8" cross-hatch scribes. (Rating = 5B).
Pencil Hardness (ASTM D-3363)
Using Eagle Turquoise pencil leads, surface hardness ranges from H to 2H.
Impact Resistance (Modified ASTM D-2794)
Using a falling weight impact tester, the film surface withstands up to 160 inch lbs. of direct and reverse impact.
Flexibility, Mandrel (Modified ASTM D-522)
The film surface withstands a 180º bend over a 1/8" diameter with no loss of adhesion or surface cracking.
Abrasion Resistance (Modified ASTM D-4060)
Coating weight loss after 1,000 cycles of Taber abraser equipped with CS-10 wheels loaded to 1 kg per wheel is
approximately 40-60 mg.

tiki

要了解油漆的种类才能知道吧

sindk

供参考。。。
Overbake Stability
A hybrid powder will withstand twice the recommended cure time without discoloration.
Adhesion (ASTM D-3359, Method B)
Using pressure sensitive tape, no coating is  ...
lewisfei 发表于 2009-4-2 16:28

最基本的检测项目

wjk529

按照标准或客户的要求 。
不同类型的涂料检测的项目不一样
就这样生活 发表于 2009-3-11 17:20

    我公司就是这样的

小不悔

按照国家标准就行