风电叶片涂料四大家

zblhx84

Basf-Rulis:
Mankiewicz:http://www.mankiewicz.com/,http://www.alexseal.com
Bergolin:http://www.bergolin.de
PPG-Selemix：http://corporateportal.ppg.com/Refinish/Selemix/EN，www.selsmix.com

lnlcs

风力发电机叶片材料认证程序
风力叶片材料的认证 (Certification for Materials of Rotor blades) 是风机叶片认证的重要部分，通常风力
发电机叶片材料认证包括如下两个部分：

Test in Chinese approbatory test laboratory 叶片材料试验在GL认可的实验室

QM System Certification 叶片材料制造厂商质量管理体系的认可
风力发电机叶片材料认证工作可按下列步骤进行：
1. 申请认证的叶片材料制造厂商向 GL 提出书面的认证申请。
2. GL 将向申请厂商作出相关项目的认证报价。
3. 部件制造厂商确认GL 的认证报价，签字盖章后将报价文件寄回。
4. 材料制造商与相关实验室联系实验，并通知GL 到工厂进行实验样品取样工作，经GL 检验师
封样后由工厂将样品寄到实验室。
5. 实验室按照GL 的要求进行实验，并且需要GL 检验师现场见证实验。
6. 相关实验室完成实验报告（Test report），并将实验报告交给GL Wind Head office 进行审核。
7. GL 将派检验师在材料生产过程中对生产厂家的资质进行审核（Workshop approval）。
8. 所有材料通过GL Wind Head office 审核合格后，对检验材料颁发GL 的认证证书。
9. 在GL 证书的有效期内，GL 将保留每年一次对于工厂的生产资质进行复审的权利。
以上是GL 对风力发电叶片材料认证程序的简要叙述，因为风电叶片材料认证涉及面较广，无法
在此一次详述，您的企业可通过访问我们的主页http://www.gl-group.com/industrial/glwind/3780.htm 作为渠
道，进一步了解有关认证的各方面情况，如尚有其它问题，可随时与我们联系。
2008 上海
Germanischer Lloyd Industrial Services Shanghai Representative Office •Rm. 3201-08, 381 Huaihai M. Road •
Shanghai 200020 • China
Industrial Services
Room 1130-1141
Shanghai Central Plaza
381 Huaihai M. Road
Shanghai 200020
P.R.China
Phone +86 21 5351 0866
Fax +86 21 6391 6006
glis-china@gl-group.com
www.gl-group.com/glis
Wind Turbine Generator Blade material Certification Procedures
Wind turbine blade (WTB) material certification is an important part of the certification in WTB certification, usually wind
turbine blade material certification including the following two parts:
􀂃 Test in Chinese approbatory test laboratory (Material testing laboratory accredited by GL)
􀂃 QM System Certification (WTB material manufacturer's QMS approved by GL)
Wind turbine blade material certification can follow these steps:
1. WTB material manufacturer who apply for certification submit written application of certification to GL.
2. GL supply related items certification quotation to applied manufacturer.
3. Manufacture should confirm GL’s quotation, signature and stamp, then send back to GL.
4. Materials manufacturers contact related laboratory to arrange experiments, and inform GL to go to the factory for
sampling, samples will be sent to the laboratory by manufacture after GL engineer checking and sealing.
5. Experiments should be carried out in accordance with the GL requirements by laboratory and needed to GL
engineer at the scene to witness the experiments.
6. Test report should be finished by related laboratory and sent to GL Wind Head office for auditing.
7. GL will assign engineer auditing the manufacturer's qualification during the material production process (Workshop
approval).
8. After all documents were approved and passed the examination by GL Wind Head office, issue GL certificate to
inspected material.
9. GL will keep the right which reexamine factory's product qualification once a year during period of validity of GL
certificate.
Hereinbefore are brief description of GL wind generator blade material certification process, because the wind blade
material certification involves too much more areas, can not be elaborated in this procedure. Your can visit our home
page as a channel http://www.gl-group.com/industrial/glwind/3780.htm, For further information on the various aspects
of certification, such as there are other problems, please contact GL at any time.
2008 Shang Hai
Managing Directors: Lutz Wittenberg (Spokesman) • Hans Berg
Germanischer Lloyd Industrial Services GmbH, Registered Office Hamburg No. HR B 86804
Place of performance and jurisdiction is Hamburg. The latest edition of the General Terms and Conditions of Germanischer Lloyd Industrial Services GmbH is applicable.
German law applies.

lnlcs

GL认证人员出差费用很高，住宿加机票，每天补助700欧元，当然都是企业出了。

tanss

强！国内敢这么做的公司肯定。。。。。。。。。。。。少吧！

akzoabel

最爽的估计是美凯维奇
最郁闷的估计是博格林
PPG偷着乐
最急的是Basf
后面还有数家等着，看着，忙着，跑着

d20041423

国内有哪家通过GL认证了？

sakya

似乎国内还暂时未有厂家通过德劳认证，致电德劳咨询认证事宜，对方似乎也没有很大的兴趣。再说了，即便是拿到GL的认证，也未必能争得过那四家。

jeff

6# d20041423

华南这边有那些公司在做风电叶片涂料?谢谢了

akzoabel

个人觉得国内企业想做好蛮难的，因为树脂，一些产自欧洲的特种树脂国内很难买到。
例如科宁的一个树脂，美凯威奇用过。中国区市场不供货，如果要在德国卖的话，一是贵，二是起订货量就是15吨。

alexander.yee

由于整个风电都是国外，欧洲在主导，所以涂料也是他们在主导，谢谢LZ的资料

shine

6# d20041423  

华南这边有那些公司在做风电叶片涂料?谢谢了
jeff 发表于 2009-10-11 11:31

华南这边大桥在做.

happy

认证很麻烦

dwhite

我怎么什么都看不到

maywinder

涂料是谁指定的？ 叶片、塔筒制造商还是整机厂家啊？

冬日飘雪b

积分扣了，下载不了，郁闷

1608liuweijie

楼主胆子不小敢框论坛编辑/:815

chenzuyi

呵呵  阅读限制  看不了